Westell Technologies Westell LiteLine 6110 - Manual (Page 75)

030-300233 Rev. A 75 May 2006
Westell (Models 6000, 6100, 6110) User Guide
12.8.1 Configuring UPNP on the Router
To enable UPNP on your Router, perform the following steps:
1. Select Configuration > Service Configuration from the main menu.
2. Click the UPNP Enable box (a check mark will appear in the box).
3. Follow the instruction in the pop-up screens to save the UPNP configuration and reset the Router.
4. After the Router has been reset, confirm that your DSL sync and PPP session are UP.
NOTE: When you are ready to disable UPNP, clear the UPNP Enable box in the Service Configuration screen.