Westell Technologies Westell LiteLine 6110 - Manual (Page 74)

030-300233 Rev. A 74 May 2006
Westell (Models 6000, 6100, 6110) User Guide
12.8 Service Configuration
The following settings will be displayed if you select Service Configuration from the Configuration menu.
Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting
your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router are
open and that the required application traffic can pass through your LAN. For a list of supported services, go to
section 16 (NAT Services).
Current Profile
Displays the NAT (Network Address Translation) services that you have
selected.
Service Name Drop down selection menu of NAT (Network Address Translation) service you
can select to configure you Router.
UPNP Enable Factory Default = Disable
Enabling UPNP (Universal Plug and Play) allows automatic device discovery
by your operating system.