Westell Technologies Westell LiteLine 6110 - Manual (Page 90)

030-300233 Rev. A 90 May 2006
Westell (Models 6000, 6100, 6110) User Guide
13.1 Port Forwarding Ranges of Ports
To select Port Forwarding Ranges of Ports, click on define custom service from the Service Configuration
screen, and then select Port Forwarding Ranges of Ports from the Custom Service screen. Click on Next. The
follow settings will be displayed in the Port Range screen. Enter your values in the Global Port Range fields and
click next to continue.
13.2 Adding Port Forwarding Ports
If you made changes in the Port Range screen and clicked next, the following screen will be displayed. You may
either click close to accept the changes, or click add to return to the Port Range screen and enter additional port
range values. You can repeat this step for each range of ports that you want to add (up to 62 port forwarding ranges).
After you have finished adding ports to the Global Port Range, click close to accept the information you have entered
and to return to the Service Configuration screen.
IMPORTANT: After you click close, return to the Service Configuration screen and, from the drop-down menu,
select the service name that you used in your port range configuration. Then, click enable to allow the settings to take
effect. In the following screen, My New Service is the service name used in this port range configuration.