Oki B8300 - Manual (Page 84)

Saddle stitch finisher — 83
Staple jam removal
1. Unlatch the saddle stitch finisher and
slide it away from the printer.
2. Open the front cover.
3. Turn roller rotating knob C as shown in the
illustration until the blue indication is
seen.
4. Remove the paper from the stapler
compiler.
5. If saddle stitch was selected, open the
saddle stitch section cover.
6. Remove the misfed paper. Be careful not
to tear the misfed paper during removal.
7. Close the saddle stitch section cover.
8. Open the front cover and pull out the
stapler unit.
9. Turn roller rotating knob A in the direction
of the arrow to move the staple unit to the
front. Turn the roller rotating knob until the
triangle mark is aligned with the index.
Roller rotating knob A
Staple unit