Oki B8300 - Manual (Page 46)

Configuration settings — 45
CONFIGURATION SETTINGS
There are three basic options that can be set. These are:
Default settings Basic settings used in printing.
PCL settings Sets a PCL symbol set.
PostScript settings Defines whether a PostScript error page is printed or not when a PostScript error
has occurred.
Operation procedure common to all
printer configuration settings
(Items that can be set from the operator panel)
When the machine is being operated from the
operator panel:
1. Press the [MENU] key to display the
configuration setting menu screen.
Press the [MENU] key repeatedly until the
message
CONDITION SETTING appears.
Any print jobs held in the printer and any
job currently transmitted to the printer
will be printed with the former printer
settings.
2. Press the [OK] key.
3. Press the Sor T key to display the
desired setting item.
4. Press the [OK] key.
5. Press the Sor T key to display the
desired setting item.
6. Press the [OK] key.
7. When setting is complete, press the
[MENU] key to return to the basic screen.
“ *” will be displayed to the right of the selected
item and setting will be registered.
To set another item, press the [BACK/C] key to
return to step 3 and repeat the procedure to
step 6.
> If the [BACK/C] key is pressed after each
setting is complete, the display that has
called the setting will appear again. If the
wrong number is selected, press the
[BACK/C] key to select the correct
number.