Oki B8300 User Manual

Page 19

Overview — 18

Menu group and Key explanations

main unit operation panel

The menu groups are classified into five groups and are selected consecutively by pressing the [MENU]
key. If the [OK] key is pressed when the desired menu screen is displayed, a message will appear to
indicate the next required operation.

PRINT JOBS ON HOLD

SET OPERATIONS
CONDITIONS

CUSTOM SETTINGS

KEY OPERATOR
PROGRAMS

Job status screen

The message [WARMING UP] will be displayed when the power is turned on and a
list of the current job plus reserved jobs or a list of completed jobs will be
displayed on the job status screen.
Examples of the various messages which will be displayed are shown below.
(Display example)

[ADD PAPER]
When the status display shows [ADD PAPER], paper is required to
complete a job in progress. In this case, printing of the job will be
suspended until the required paper is added or another paper is
selected,see Setting the Paper Size and Type.
While a current job is suspended, the printer will print a reserved job if
paper is available from another source for that job but will not print
any other jobs.

The printer is warming up.

The printer is ready to print.

The printer is currently printing.

Out of toner.
Replace the toner cartridge.
See the relevant user manual.

A misfeed has occurred.

Out of paper. Load paper.

Print hold

If the job retention function is used from your computer, print data will be
stored in the printer as a hold job.
The job retention function can be used only if the printer is equipped
with a hard disk drive unit.

Condition settings

The printer condition settings are used for basic printer settings.

Custom settings

Custom settings are used to make settings based on use patterns.

Key operator programs

These are settings used by key operators (administrators of this product).

[MENU] key

READY.

WARMING UP.

READY.

FROM TRAY #

CHANGE THE TONER
CARTRIDGE.

PAPER JAM.

ADD PAPER.*