Oki B8300 - Manual (Page 61)

Troubleshooting and maintenance — 60
If the machine is not equipped with a
duplex module, close the side cover.
4. After closing, confirm that the misfeed
message has been cleared and the
normal display appears.
Misfeed in the transport area, fusing
area and exit area
CAUTION: The fusing unit is hot. Take care when
removing paper. Do not touch the metal parts.
1. Unlatch the duplex module and slide it to
the left. Gently move the module away
from the machine. If the machine is not
equipped with a duplex module, open the
side cover.
2. Remove the misfed paper as shown. If
paper is misfed in the fusing area, turn
roller rotating knob A in the direction of
the arrow to remove the misfed paper.
CAUTION: Do not touch or damage the transfer
roller or the photo drum.
3. If paper is misfed in the transport area,
turn roller rotating knob B in the direction
of the arrow to remove the misfed paper.
4. If the misfed paper is inside the fusing
area, turn down the fusing unit open tab
to open the fusing unit and remove the
misfed paper.
5. If paper is misfed in the exit area, remove
it as shown, taking care not to tear the
paper.
6. If the duplex module is equipped with an
exit tray and paper is misfed in the exit
area, remove the misfed paper as shown
in the illustration.
7. Gently close the duplex module.
8. If the machine is not equipped with a
duplex module, close the side cover.
9. After closing, confirm that the misfeed
message has been cleared and the
normal display appears.
Roller rotating knob A
Transfer roller Photoconductive drum
Roller rotating knob B
Roller rotating knob B
Fusing unit open tab