Oki B8300 - Manual (Page 28)

Overview — 27
Loading paper in the stand/MPD and
2000 sheet paper drawer
● Upper paper tray
The upper paper tray is equivalent to the multi-
purpose drawer. The method of loading paper
and the paper that can be used are the same as
for the multi-purpose drawer. Refer to the
description of the multi-purpose drawer.
● Lower paper tray
The lower paper tray is a large capacity tray that
holds 2,000 sheets of A4 or 8½" x 11" paper
(80 g/m
2
or 20 lb). Use the following procedure
to load paper into the large capacity tray.
If the paper size or paper type is changed in
either paper tray, the tray settings must be
changed in custom settings. Refer to Setting
the Paper Size and Type.
1. Pull out the large capacity tray until it
stops.
2. Load paper into the right-hand paper
feed tables. This holds approximately
1,200 sheets.
3. Raise the paper guide and load paper into
the left-hand paper feed table. This holds
approximately 800 sheets. After loading
paper, be sure to return the paper guide.
4. Gently push the large capacity paper tray
firmly all the way into the printer.
5. Set the paper type.
If you have changed the paper size from
the AB system to the inch system or vice
versa, select the relevant type referring to
Setting the Paper Size and Type.
Loading paper in the stand/MPD and
2000 sheet paper drawer is now
complete.
Specifications (stand/MPD and 2000 sheet paper drawer)
Name Stand/MPD and 2000 sheet paper drawer
Paper size/weight See specifications of paper trays
Paper capacity
(ordinary paper) Upper tray: 500 sheets 80g/m 2 (20 lb)
Lower tray: 2,000 sheets 80g/m 2 (20 lb)
Dimensions 619 mm (W) x 664 mm (D) x 404 mm (H)
24 3 /
8
" (W) x 26 5 / 32 " (D) x 15 29 / 32 ") (H)
Weight Approx. 34 kg (75 lb)
Specifications are subject to change without notice.