Oki B8300 - Manual (Page 35)

Installing printer drivers and utilities — 34
INSTALLING PRINTER
DRIVERS AND UTILITIES
The following software can be installed from
the installer supplied on the CD-ROM:
• PCL printer drivers (PCL5e and PCL6)
• Printer Administration Utility.
Execute installation from the CD-ROM using the
following procedure.
1. Start Windows.
2. Insert the supplied CD-ROM into a CD-
ROM drive of your computer.
If your computer is configured for auto
start on CD-ROM insertion,
the lLanguage Select] or [User Select]
screen described in step 5 will appear.
(Steps 3 and 4 are not needed.)
3. On the [Start] menu, click [Run].
4. Enter the CD-ROM drive and setup
command. Then click [OK].
Example: If the CD-ROM drive is
designated as Drive R:, enter
[R:\SETUP.EXE].
5. Select the language which you want to use.
6. Select [Online Manuals, Driver
Installation or Network Utilities] and
choose the item you want to install.
> A restart of your computer may be needed
depending on the system. Click [Yes] to
restart the computer.
Uninstalling printer drivers and
printer utilities
When uninstalling a printer driver that has
been installed from the [Add Printer] wizard,
right-click the printer to be deleted from
[Printers] in the Control Panel and select
[Delete]. When uninstalling utility software, use
[Add/Remove Programs] in [Control Panel]. Use
the Windows standard operation for each case.
PLUG AND PLAY OR ADD
PRINTER WIZARD
Before installation
Before installing the printer drivers, check the
following items.
Ensure that your computer system meets the
following requirements.
Computer
IBM PC/AT or compatible computer
Hardware requirements of the operating
system must be satisfied.
Operating system
Windows 95
Windows 98
Windows 2000
Windows NT 4.0
Windows Me
Windows XP
When using Plug and Play or using the Add
Printer Wizard to install printer drivers, enter
the directory name indicated below
as a source directory.