Oki B8300 - Manual (Page 24)

Overview — 23
Setting the paper size and type
from the operation panel on the
main printer
When the paper size or type is changed in a
paper tray, set them up by referring to the
following procedure.
1. Press the [MENU] key repeatedly until
CUSTOM SETTINGS appears in the
message display.
2. Press the [OK] key.
3. When the [OK] key is pressed, TRAY
SETTING will appear in the message
display.
When the [OK] key is pressed, the message
shown above will appear in the message
display.
4. Select the desired paper tray.
Press the S or T key repeatedly until the
desired paper tray is indicated in the display.
5. Press the [OK] key.
The paper size and paper type of the tray
selected in step 4 will appear.
If TRAY 1 is selected in step 4, the message
shown below will appear in the display.
6. Press the T key
If TRAY 1 is selected in step 4, the message
shown above will appear in the display.
7. Press the [OK] key. To cancel the setting
change, press the [BACK/C] key to return
to step 4.
8. Select the paper type that has been set in
the tray. Press the
S or T key repeatedly
until the paper type that has been set
appears.
> Special paper such as thick paper,
transparency film, labels, and postcards
can be set for tray 2 and the bypass tray.
> Envelopes can be set only for tray 2.
9. Press the [OK] key.
10. Ensure that the desired paper size is
selected. Press the S or T key
repeatedly until the desired paper size
appears.
> Depending on the selected tray, a
selection for
AUTO-AB and AUTO-INCH
may appear. AUTO-AB: Select when you
have set AB system paper.
> AUTO-INCH: Select when you have set
inch system paper.
> When the paper system is changed from
the inch system to the AB system or vice
versa, the paper type must be designated.
Select the paper type.
> If you have set paper of non-standard
size, select
NON STANDARD. This size can
be selected when tray 2 or the bypass tray
has been selected in step 4.
11. Press the [OK] key to complete the
setting.
LETTER
PLAIN
CHANGE TRAY
SETTING OK
PLAIN
OK
PLAIN
OK
TRAY SETTING
TRAY 1
T