Oki B8300 - Manual (Page 8)

7 — Before you do anything please read this
Moving the machine
Lift this machine at the positions shown in the illustration below and carry it horizontally.
> CAUTION
Two people are required to lift and carry this machine. The centre of gravity of the machine is slightly
to the left of the centre of the machine when viewed from the front. If a duplex module is installed the
centre of gravity will be even further shifted to the left. When lifting the machine be careful to steady it
to prevent it from toppling. Also be sure that all covers and the duplex module are securely closed and
latched before lifting.
If a duplex module is installed, do not lift the machine by the module as it may come off causing it and
the machine to drop.
Remove the multi-purpose drawer and lift at the positions shown in the illustration. To avoid injury be
sure to completely remove the multi-purpose drawer.
If the machine has been placed on a stand/paper drawer:
The stand/paper drawer is equipped with casters for moving. Unlock the adjusters of the stand/paper
drawer and gently move the machine taking care to steady it to prevent it from toppling.
> CAUTION
The centre of gravity of this machine is a little deviated to the left from the centre. If the machine is not
equipped with a multi-purpose drawer or a stand/paper drawer, take care in opening the left side cover
(or the duplex module) not to cause toppling of the machine.
Do not cover the ventilating holes of this machine. Do not install this machine in a location where these
holes are covered. If these holes are covered, heat will not be dissipated and a fire may be caused.
Remove the multi
purpose drawer
in advance.
Front side Rear side