Oki B8300 - Manual (Page 75)

Finisher — 74
Staple cartridge replacement
When the staple cartridge becomes empty, the
message “Add staples.” will appear in the
message display of the operation panel.
Follow the procedure below to replace the
staple cartridge.
1. Open the front cover.
2. Turn the staple unit face up.
3. Pull the release lever for the staple box
and remove the box.
4. Remove the empty staple cartridge from
the staple box.
5. Insert a new staple cartridge into the
staple box aligning the arrow of the staple
cartridge with that of the staple box.
NOTES:
> Do not remove the tape from the cartridge
before inserting the staple cartridge into
the box.
> When reinstalling the staple box, push it
in until it clicks into place.
6. Remove the tape from the staple cartridge
by pulling it straight.
7. Reinstall the staple box. Push the staple
box in until it clicks into place.
8. While pushing the staple unit release
lever to the left, rotate the staple unit to
face down.
9. Close the front cover.
Make a test print or copy in staple sort mode to
ensure that stapling is performed properly.