Omron CS1W-ETN21 - Manual (Page 93)

68
POP Section 3-5
3-5 POP
POP Server Setup
For details, refer to SECTION 3 Mail Receive Function in the Operation Man-
ual Construction of Applications.
Item Contents Default
Server specifi-
cation type Select whether the POP3 server used for receiving
mail is to be specified by IP address or the host's
domain name (i.e., host name). IP Address
IP Address Set the IP address for the POP3 server used for
receiving mail.
This setting is enabled only when “IP address” is
selected as the method for specifying the server.
0.0.0.0
Host name Set the host domain name (i.e., the host name) for
the POP3 server that is to be used for receiving
mail.
This setting is enabled only when “host name” is
selected as the method for specifying the server.
None
Port No. Set the port to be used for connecting to the POP3
server that is to be used for receiving mail.
This setting does not normally need to be changed.
0
(Number 110
is used.)
Account Name Set the account name to be used for sending and
receiving mail.
Only alphanumeric characters can be used.
If no account name is set, the portion of the local e-
mail address to the left of the @ will be used.
None
Mail password Set a password for the account that is to be used
for sending and receiving mail. None
Server access
interval time Set the interval for sending and receiving mail. Mail
will be automatically sent and received at the inter-
val set here. 0
(5 minutes)