Omron CS1W-ETN21 - Manual (Page 75)

50
Unit Setup for Particular Applications Section 2-10
The default IP router is selected when no Network ID exists in the IP router
table for the destination network number. To set the default IP router, set
0.0.0.0 for the IP address and set the default IP router's IP address for the
router address.
2-10 Unit Setup for Particular Applications
Aside from the basic settings, the required settings vary depending on the
particular communications applications that are used.
For details on settings, refer to SECTION 3 CX-Programmer Unit Setup.
FINS/UDP
For details, refer to SECTION 6 FINS Communications Service in the Opera-
tion Manual Construction of Networks.
Use CX-Integrator to make routing table settings as required.
FINS/TCP
For details, refer to SECTION 6 FINS Communications Service in the Opera-
tion Manual Construction of Networks.
Use CX-Integrator to make routing table settings as required.
Socket Services
FTP
For details, refer to SECTION 4 FTP Server Function in the Operation Manual
Construction of Applications.
Mail
CX-Programmer tab Settings
Setup Conversion
FINS/UDP Port No.
IP Address Table
Destination IP Address
Change Dynamically
CX-Programmer tab Settings
Setup FINS/TCP Port No.
FINS/TCP FINS/TCP Connection Setup
CX-Programmer tab Setting
Setup Keep-alive
CX-Programmer tab Settings
Setup Login
Password
Port No
CX-Programmer tab Settings
DNS IP Address
Port No.
Retry timer