Omron CS1W-ETN21 - Manual (Page 92)

67
SMTP Section 3-4
3-4 SMTP
SMTP Server Setup
For details, refer to SECTION 2 Mail Send Function in the Operation Manual
Construction of Applications.
Item Contents Default
Server specifi-
cation type Select whether the SMTP server used for send-
ing mail is to be specified by IP address or the
host's domain name (i.e., host name). IP Address
IP Address Set the IP address for the SMTP server used for
sending mail.
This setting is enabled only when “IP address” is
selected as the method for specifying the server.
0.0.0.0
Host name Set the host domain name (i.e., the host name)
for the SMTP server that is to be used for send-
ing mail.
This setting is enabled only when “host name” is
selected as the method for specifying the server.
None
Port No. Set the port to be used for connecting to the
SMTP server that is to be used for sending mail.
This setting does not normally need to be
changed.
0
(No. 25 is used.)
Local mail
address Set the mail address for the Ethernet Unit. None
Use POP before
SMTP Select whether or not to use the mail receiving
method (POP before SMTP) in which the POP
server must be accessed (to receive mail) before
the SMTP server is accessed (to send mail). Not checked