Omron CS1W-ETN21 - Manual (Page 205)

180
Command/Response Reference Section 7-3
Results Storage Area Response Codes
Note These errors occur only in large multilayered networks.
7-3-17 TCP CLOSE REQUEST
Requests processing to close a TCP socket. Other processing being carried
out is forcibly ended and a code is recorded in the results storage area.
Command Block
Response Block
Results Storage Format
Parameters
Socket Option (Command) The socket option specified as 1 byte. The setting is not valid for this com-
mand. Set to 0.
TCP Socket Number
(Command) The TCP socket number to be closed specified as 1 byte between 1 and 8.
Response code Description
0000 Normal
0020 Connection to the remote socket was broken during transmis-
sion (EPIPE).
003E Internal buffer cannot be reserved due to high receive load
(ENOBUFS).
0042 (see note) An error occurred (EMSGSIZE).
0044 (see note) Received ICMP data (ENOPROTOOPT).
0045 (see note) A communication error occurred with the remote node
(ECONNABORTED).
004B (see note) A communication error occurred with the remote node
(ECONNRESET).
004E (see note) A parameter error occurred at the remote IP address
(ENETUNREACH).
004F (see note) Received ICMP data (EHOSTDOWN).
0051 (see note) A parameter error occurred at the remote IP address
(EHOSTUNREACH).
0053 (see note) A communication error occurred with the remote node
(ETIMEDOUT).
0081 The specified socket was closed during transmission.
Results storage area Command
code
Socket option
TCP socket number
27 14
Response
code
Command
code
27 14
Response code