Nortel Networks BCM50 - Manual (Page 98)

98 Chapter 8 Installing an expansion unit
NN40020-302
Use one of the following procedures to mount the expansion unit:
• Installing the BCM50 unit in an equipment rack on page 82
• Installing the BCM50 unit on the wall on page 86
• Installing the BCM50 unit on a desktop or shelf on page 91
Next step
If you install a second expansion unit on the system, repeat the procedures in this section for the
second expansion unit.
After you install the expansion unit, proceed to Connecting the cables to the BCM50 system on
page 99.