Configuring the initial parameters, To enter the keycodes – Nortel Networks BCM50 User Manual
Page 130
130
Chapter 13 Using Telset Administration to set the basic parameters
NN40020-302
Configuring the initial parameters
Use the following procedures to configure the initial parameters for the BCM50 using Telset
Administration:
•
•
•
•
•
To select the telephony startup template and start DN
•
•
To create Telset user accounts
To enter the keycodes
1
Select Feature 9*8 from a two-line display telephone.
2
Enter the following user ID and password:
User ID: SETNNA
Password: CONFIG
The numerical values of the user ID and password are 738662 and 266344, respectively.
3
Press NEXT to scroll through the menu and select Feature Codes.
4
Press OK.
The system ID (SID) displays.
5
Press NEXT.
6
Enter your sequence ID.
7
Press NEXT to scroll through the list and perform one or both of the following tasks:
a
To activate features, select Feature List.
•
Press SHOW to view the available features.
•
Use the soft keys to activate features for your system.
b
To enter a new keycode, select Entitlement Code.
•
Press SHOW to view the current keycode.
•
Use the soft keys to modify the keycode for your system.
For more detailed information about retrieving and entering the keycode for your system, see
the Keycode Installation Guide.