To insert the new mbm, The procedure – Nortel Networks BCM50 User Manual
Page 181

Chapter 22 Replacing a media bay module
181
Installation and Maintenance Guide
To insert the new MBM
1
Unpack the new MBM.
2
Verify that all dip switches are in the factory default positions. See
3
Install the MBM. See
Installing a media bay module in an expansion unit
4
If the new MBM is a different type of module (for example, you replaced a DSM16 with a
4x16), use Element Manager to configure the new MBM before continuing. For more
information about configuring the MBM, see the procedure
5
Reconnect the power supply cable. See the procedure
To connect a power supply without a
6
Connect the telephone line and extension cables to the port on the front of the new MBM. See
Connecting the lines and extensions
If the new MBM is a different type of module (for example, you replaced a DSM16 with a
4x16), you must make any additional connections to the MBM before continuing.
7
Proceed to the procedure
8
Continue with the procedure