Next step, Location for feet on the, Bottom of the bcm50 unit – Nortel Networks BCM50 User Manual
Page 92
92
Chapter 7 Installing the main unit
NN40020-302
Figure 44 Location for feet on the bottom of the BCM50 unit
3
Position the BCM50 unit on a table or shelf. Make sure you leave enough space around the
unit for ventilation and access to the cables.
4
If the BCM50 system has additional units, you can install the other units on top of, or beside,
the existing BCM50 unit.
•
To install the additional units beside the existing unit, repeat steps 1 to 3 for each unit.
•
To install the additional units on top of the existing unit, see the procedure
BCM50 unit on top of another unit
5
Install the power supply next to the BCM50 unit.
The power supply must be within 1.5 m (5 feet) of the BCM50 unit and within 1.5 m
(5 feet) of the AC power outlet (wall outlet or UPS).
6
Repeat step 5 for each power supply.
Next step
If you install an expansion unit, proceed to
Connecting the cables to the BCM50 system
Attach feet here