Nortel Networks BCM50 - Manual (Page 64)

64 Chapter 3 Viewing the BCM50 system LEDs
NN40020-302
ADSL router LEDs (BCM50a and BCM50ba only)
The three ADSL router LEDs on the faceplate of the BCM50a and BCM50ba main units monitor
router status, data, and DSL. The figure
ADSL router LEDs on the BCM50a and BCM50ba main
units (BCM50a shown) on page 64 shows the location of the three ADSL router LEDs.
Figure 27 ADSL router LEDs on the BCM50a and BCM50ba main units (BCM50a shown)
The table ADSL router LED descriptions on page 64 describes the possible ADSL router LED
states.
Table 11 ADSL router LED descriptions
LED Status Description
Router
status
On The router card is functioning properly.
Off The router card is not ready or malfunctioned.
Flashing The router card is rebooting.
Data
Flashing The router card is sending or receiving data through the WAN port.
Off The router card is not sending or receiving data through the WAN port.
DSL
On
The router card is linked successfully to a digital subscriber line access
multiplexer (DSLAM).
Off The DSL link is not functioning.
Flashing The router card is initializing the DSL line.
Router
status
Data DSL