Nortel Networks BCM50 - Manual (Page 129)

Chapter 13 Using Telset Administration to set the basic parameters 129
Installation and Maintenance Guide
Chapter 13
Using Telset Administration to set the basic
parameters
You can use Telset Administration through a digital telephone with a two-line display to set the
BCM50 configuration parameters.
You cannot set all the basic parameters using Telset Administration. Therefore, after configuring
the initial parameters, you must use Element Manager to set the startup parameters. See
Configuring the startup parameters on page 139.
For more information about Telset Administration, see the Telset Administration Guide.
The figure Overview of using Telset Administration on page 129 shows an overview of using
Telset Administration to set the basic parameters.
Figure 60 Overview of using Telset Administration