Using element manager to set the basic parameters, Chapter 14 – Nortel Networks BCM50 User Manual
Page 135

Chapter 14 Using Element Manager to set the basic parameters
135
Installation and Maintenance Guide
Chapter 14
Using Element Manager to set the basic parameters
The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
You can use the latest Element Manager version (for BCM50 Release 2) to manage all previous
BCM systems that require Element Manager (BCM50 Release 1 and BCM 4.0). You need only
one instance of Element Manager on your computer.
Through Element Manager, you can configure all of the basic parameters:
•
Configuring the initial parameters
•
Configuring the startup parameters
For more information about using Element Manager, see the Administration Guide.
The figure
Overview of using Element Manager
on page 135 shows an overview of using Element
Manager to set the basic parameters.
Figure 61 Overview of using Element Manager