NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 90)

6-8 Maintenance
When relocating or storing the Module Enclosure with the modular servers
being installed in it
Refer to the User's Guide of Module Enclosure for how to relocate or store the modular server being
installed in Module Enclosure.
When relocating or storing the modular server apart from the Module
Enclosure
Remove the device from the Module Enclosure according to the procedure described in Chapter 3.
Package the device in the bag or carton box used at the shipment before relocating or storage.
IMPORTANT: If you use the equipment after transported or relocated,
check the system timer and adjust it if necessary. If the system timer
advances or delays remarkably with the passage of time, contact your
service representative to repair it.
The modular server or internal option device may be dewed if it is
brought to a warm place from a cold place suddenly. Using a modular
server or an internal device with dew attached may cause malfunction
or failure.
Make sure to adapt them to the operating environment before using
them.
When relocating or storing the Module Enclosure
Refer to the User's Guide of Module Enclosure for details.