NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 69)

Configuring Your Modular Server 4-17
Server
The items which can be set on the Server menu and their functions are described below.
For setting of [System Management], [Console Redirection], [BMC LAN Configuration], and
[Event Log Configuration], first select the item and press Enter to display the submenu.
Option Parameter Description Your Setting
System
Management N/A
Console
Redirection N/A
BMC LAN
Configuration N/A
Event Log
Configuration N/A
Assert NMI on
PERR Disabled
[Enabled] When enabled, PCI bus parity
error (PERR) can be detected and
notified as NMI at occurrence of an
error.
Assert NMI on
SERR Disabled
[Enabled] When enabled, PCI bus system
error (SERR) can be detected and
notified as NMI at occurrence of an
error.
FRB-2 Policy Disable FRB2 Timer
[Retry 3 Times]
Always Reset Set the policy to be applied to FRB
level 2 timer at occurrence of an
error..
Boot Monitoring [Disabled]
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes Specify whether the boot
monitoring feature is enabled or
disabled and the timer value on
booting.
Set this item to "Disabled" if
ARCServe uses the Disaster
Recovery Option.
Boot Monitoring
Policy [Retry 3 times]
Always Reset This item indicates the processing
at the occurrence of timeout during
boot monitoring.
Retry 3 times: The system is reset
after the occurrence of timeout
and OS boot is retried up to
three times.
Always Reset: The system is reset
after the occurrence of timeout
and OS boot is retried
repeatedly.