NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 88)

6-6 Maintenance
7. Follow the guide line shown at the bottom of the screen, and press the Esc key.
The [Enduser Menu] below is displayed.
Enduser Menu
Please choose a function by the arrow key and push Enter key.
TeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
Enduser Menu
Shows the diagnostics completion screen of the above diagnostics.
Shows a list of connected devices.
> Shows the log information of the diagnostics. Log information can be
saved.
To save it, connect a FAT formatted removable media, and select
.
Optional features can be used from this menu.
Reboots the system.
8. Select in the [Enduser Menu] above.
The modular server restarts and the system is started from the NEC EXPRESSBUILDER.
9. Exit the NEC EXPRESSBUILDER, and remove the DVD from the optical disk drive.
10. Power off the modular server.
11. Reconnect LAN between the switch kit and the modular server that have been
disconnected in Step 2.
This completes the system diagnostics.