NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 140)

8-6 Upgrading Your Modular Server
INSTALLATION/REMOVAL PROCEDURE
Install or remove the devices in the following procedure.
SO-DIMM
The SO-DIMM (Small Outline Dual Inline Memory Module) is inserted into the SO-DIMM socket
on the modular server. The modular server has two SO-DIMM sockets. Install or remove two
DIMMs one by one.
Install the SO-DIMM in SO-DIMM socket #1, then in socket #2.
NOTES:
„ Up to 2GB memory can be added.
„ The modular server requires at least one DIMM to operate.
IMPORTANT:
„ The DIMM is easily affected by static electricity. Handle the DIMM
after making your body contact with a metallic frame section of the
cabinet to discharge the static electricity from your body. Do not
make bare hands contact with terminals and components on the
DIMM. In addition, do not put the DIMM on a desk directly. See
"Static Precautions" for details of the static electricity.
„ Do not use any DIMM not approved by NEC. If an unapproved
third party's DIMM is installed in the modular server, not only the
DIMM but also the modular server may be defected. You will be
charged by any repair of a malfunction or defect caused by such a
device within the warranty period.
SO-DIMM #1 SO-DIMM #2