NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 122)

7-32 Troubleshooting
Forgotten the login name/password to use the remote management feature through Web
browser:
→ If you have forgotten the login name or password, restore the factory default
including password by the following procedures.
IMPORTANT: Restoring the factory default clears configuration data
created by NEC ESMPRO Manager. You need to save the configuration
data before clearing password.
(1) Start NEC EXPRESSBUILDER DVD from the modular server.
(2) Select [Tool menu (Normal mode)] - [English].
(3) Select [System Management].
(4) Select [Initialize BMC].
(5) Power off the modular server.
(6) Remove the modular server from the Module Enclosure.
(7) Wait for at least 5 seconds, then install the modular server in the Module
Enclosure.