NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 128)

7-38 Troubleshooting
„ BIOS/FW Updating
Use this menu to update the software module such as BIOS and firmware of the modular
server.
IMPORTANT: Do not turn off the modular server while the update
program is running. If the update processing is discontinued, the system
becomes unable to start.
„ ROM-DOS startup FD
Use this menu to create a support disk for starting the ROM-DOS system.
„ Test and Diagnostics
Use this menu to perform various tests on the modular server system to check if the
modular server functions are normal and if the connection between the modular server and
additional board is normal.
After the Test and Diagnostics is executed, a system check program assigned to each
model starts. See Chapter 6 for details.
„ System Management
Use this menu to set parameters of BMC (Baseboard Management Controller) for remote
control and alert.
This menu's function is the same as the "System Management" of the "Maintenance
Utility".