NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 62)

4-10 Configuring Your Modular Server
Advanced
Option Parameter Description Your Setting
Memory Configuration N/A
PCI Configuration N/A
Peripheral Configuration N/A
Advanced Chipset Screen N/A
Boot-time Diagnostic
Screen [Disabled]
Enabled Specify whether the self-diagnosis
(POST) running screen is displayed
or not on booting.
If this item is set to "Disabled", the
"NEC" logo appears during POST.
(Pressing Esc causes the screen to
be switched to the POST running
screen.
If [Serial Port B] is specified for
[Server] - [Console Redirection] -
[BIOS Redirection Port], the POST
running screen is automatically
displayed.
Reset Configuration Data [No]
Yes Set "Yes" to clear the configuration
data (system information stored by
POST). The parameter is changed
to "No" after the system is booted.
NumLock On
[Off] Specify whether the Numlock feature
is enabled or disabled on booting.
[ ]: Factory-set