NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 73)

Configuring Your Modular Server 4-21
BMC LAN Configuration Submenu
Option Parameter Description Your Setting
Shared BMC
LAN [Disabled]
Enabled Set to [Disabled] to use the
management LAN port for
management LAN.
When set to [Enabled], the LAN port 1
can be used for management LAN
while sharing with the standard LAN.
When set to [Enabled], the
management LAN port is disabled.
LAN
Connection
Type [Auto Negotiation]
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex Specify the connection type for
management LAN port.
IP Address Variable Specify an IP address for
management LAN.
Subnet Mask Variable Specify a subnet mask for
management LAN.
Default
Gateway Variable Specify a default gateway for
management LAN.
DHCP [Disabled]
Enabled Set to [Enabled] to obtain an IP
address from DHCP server
automatically. If you intend to specify
an IP address manually, set to
[Disabled].
Web Interface
HTTP
Disabled
[Enabled] Set to [Enabled] to use HTTP
communication for Web interface.
HTTP Port
Number Variable Specify the TCP port number which
the management LAN uses for HTTP
communication.
HTTPS Disabled
[Enabled] Set to [Enabled] to use HTTPS
communication for Web interface.
HTTPS Port
Number Variable Specify the TCP port number which
the management LAN uses for HTTPS
communication.
Command Line Interface
Telnet
Disabled
[Enabled] Set to [Enabled] to use Telnet
communication as a command line
interface.
Telnet Port
Number Variable Specify the TCP port number to be
used for Telnet communication.
SSH Disabled
[Enabled] Set to [Enabled] to use SSH
communication as a command line
interface.
SSH Port
Number Variable Specify the TCP port number to be
used for SSH communication.
Clear BMC
Configuration [Enter] * Press Enter and select "Yes" to
initialize the BMC configuration.
[ ]: Factory-set