NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 77)

Configuring Your Modular Server 4-25
Exit
The following describes each option on the Exit menu:
Exit Saving Changes
Select this item to quit SETUP after saving the newly selected information in CMOS (non-volatile
memory). The selection of "Exit Saving Changes" causes the confirmation screen to appear.
If you select "Yes", SETUP is terminated with the newly selected information saved in CMOS (non-
volatile memory). Then the modular server automatically reboots the system.
Exit Discarding Changes
Select this item to quit SETUP without saving the newly selected information in CMOS (non-
volatile memory).
Selecting "No" allows SETUP to be terminated without storage of the modified information. If you
select "Yes", SETUP is terminated with the modified information saved in CMOS. Then the
modular server automatically reboots the system.
Load Setup Defaults
Select this item to return all the values of SETUP to the default values. Selecting "Load Setup
Defaults" causes the confirmation screen to appear.
Select "Yes" to return the values to the default values. Select "No" to go back to the Exit menu
screen.
IMPORTANT: The factory-set values of SETUP may be different
from their default values depending on the model of the modular server.
It is necessary to set the values meeting the environment in which the
modular server is used referring to the models.
Load Custom Defaults
Select this item and press Enter to load the stored custom default values. This menu does not
appear when no custom default values are stored.
Save Custom Defaults
Select this item and press Enter to save parameters set currently as the custom default values. After
the storage, the Load Custom Defaults menu appears.