NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 63)

Configuring Your Modular Server 4-11
Memory Configuration Submenu
Option Parameter Description Your Setting
Installed memory – Indicates the total capacity of installed
memory. (View only)
Available under
4GB – Indicates the capacity of memory
available in the area smaller than 4GB.
(View only)
DIMM 1 Status Normal
Error Indicates the current memory status.
DIMM 2 Status Normal
[Not Installed]
Error Indicates the current memory status.
"Normal" indicates that the memory
device operates normally.
"Error" indicates that the memory device
is defected. (View only)
"Not Installed" indicates that no memory
device is installed.
See Chapter 8 for details of DIMM.
Memory Retest [No]
Yes Set to "Yes" to clear the error information
on the memory, and perform retest. The
parameter is changed to "No" after the
system is booted.
Extended RAM
Step 1MB
1KB
Every Location
[Disabled] 1MB: The memory test is performed in the
unit of 1MB.
1KB: The memory test is performed in the
unit of 1KB.
Every-location: Every memory device is
tested.
Disabled: Only memory initialization is
performed.
[ ]: Factory-set