Panasonic WJ-SX 150A - Manual (Page 99)

102
(Add Account) button
To register a new operator, click on this button. The
Registration window will appear.
(EDIT) button: To configure the operator information,
click on this button.
(DELETE) button
To delete the operator selected in the Accounts group,
click on this button.
(Save Exit) button
Saves the configuration and closes the Account Manager
window.
(Cancel Exit) button
Cancels the configuration and closes the Account Manager
window.
● Edit Account Manager
Add a Registration Operator
1. Click on the button.
2. Enter the name in the Name box and the password in
the Password box.
Name: Up to 20 alphanumeric characters
Password: Up to 20 alphanumeric characters
3. Click on the ▼ button to select the level.
4. Click on the
(Save exit) button.
The configuration will be saved and the Registration
window will close.
To cancel the configuration, click on the
(Cancel
exit) button.
Note: You can register up to 16 accounts (operators).
Edit a Registration Operator
1. Click on the registration operator's name in the
Accounts group.
2. Click on the (EDIT) button.
3. Edit the desired parameters.
4. Click on the
(Save exit) button.
The configuration will be saved and the Registration
window will close.
To cancel the configuration, click on the
(Cancel
exit) button.
Delete a Registration Operator
1. Click on the registration operator's name in the
Accounts group.
2. Click on the (Delete) button.
3. Click on the (Save exit) button.
Note: If deleting all level 1 operators, the configuration of
WJ-SX150A Administrator Console will become impos-
sible.
■ Communication Port
This window configures the PC's usable communication
port number and its baud rate (communication speed).
● How to Display
To display this window, click on the (Communication
port) button in the main window (p. 80).
● Parameters
• Parameter Group
Com: Select the PC's communication port for the con-
nection to the unit.
Baud Rate: Select the desired baud rate (communica-
tion speed). 4800, 9600, 19200 or 38400 bps is
selectable.
The factory default setting is 38400 bps.
• Fixed Parameter Group
The data bit (8 bit), parity (none), and stop bit (1 bit) are
displayed.
Note: These parameters are fixed.
(Save Exit) button
Saves the configuration and closes the Communication Port
window.
(Cancel Exit) button
Cancels the configuration and closes the Communication
Port window.