Panasonic WJ-SX 150A - Manual (Page 116)

119
1. Press the ACK/SUSPEND button while holding down
the SHIFT button.
"ALM SUSPENDED" will appear on the monitor.
2. To cancel alarm suspension, press the ACK/SUSPEND
button while holding down the SHIFT button again.
"ALM SUSPENDED" will disappear from the monitor.
Notes:
• An alarm continues to operate even after it is suspend-
ed.
• If you suspend an alarm while an alarm image is dis-
played, "ALM SUSPENDED" will not appear on the moni-
tor. Reset the alarm, and then suspend it again.
■ Resetting the Alarm Inputs
There are two alarm reset functions:
• Alarm reset (resetting the alarm inputs per monitor)
• Alarm all reset (resetting all the alarm inputs)
● Alarm Reset
1. Select a monitor which displays "ALARM".
2. To reset the alarms, press the RESET button.
"ALARMnn" will disappear from the selected moni-
tor.
When alarms have been reset from all the monitors,
the LED display and indicators of system controllers
will work as follows for recovery.
• The LED display will return to the state before
the alarm input.
• The alarm indicator will go out.
• The CAM indicator will return to the state before
the alarm input.
Note: When more than one alarm is input and they are
associated with the same monitor, they cannot be reset
one by one.
● Alarm All Reset
1. Press the RESET button while holding down the SHIFT
button.
2. The monitor, the LED display and the indicator will
change as follows:
"ALARMnn" will disappear from all the monitor.
The LED display will return to the state before the
alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the
alarm input.
■ Suspending the Alarm Inputs
Use this function when you do not want to be disturbed by
an alarm input, for example, during the setup procedures.
T&D CAM ID EVENT
AUX1 ON AUX1 OFF STILL
ALL RESET
RESET
TOUR SEQ
SHIFT
PAUSE
NEXT
PAUSE
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON AUX2 OFF EL-ZOOM
AUX1 ON AUX1 OFF STILL
ALL RESET
RESET
TOUR SEQ
MON LOCK
DEF O
MON (ESC)
T&D CAM
MON STATUS ALL
ALM H VLD
MULTI SCRE
SEQUENCE
AUX2 O EL-ZOOM
AUX1 O STILL
SHIFT
REW/FF
STEP
GROUP SEQ
PAUSE
SUSPEND ALL RESET
ACK RESET
TOUR SEQ
PREV NEXT
OSD
PLAY PAUSE
ALM SUSPENDED