Panasonic WJ-SX 150A - Manual (Page 42)

44
● To Control a Recorder via the Network
The following is the description of the connection between a recorder and this unit to control the recorder via the network.
1. Set the recorder's unit address to a number 5 or larger . (Refer to the recorder's operating instructions.)
2. Connect the unit’s CAM OUT 1 to 8 connectors to the recorder’s VIDEO IN 1 to 8 connectors with a coaxial cable.
3. Connect the unit’s EXT IN connector to the recorder’s MULTI SCREEN OUT connector with a coaxial cable.
4. Connect the unit’s DATA HDR and DATA4 connectors to the recorder’s DATA port with a daisy chain connection cable kit
(WV-CA48/10K).
5. Select the recorder’s new unit address, which is set in Step 1, in 600 RECORDER (refer to p. 71 ) of SETUP MENU or the
Recorder (refer to p. 97) window of WJ-SX150A Administrator Console.
6. Through a browser or the recorder’s SETUP MENU, set the CTL-UNIT ADDR to a number other than 1. (Refer to the
recorder’s operating instructions.)
Notes:
• Select the PS·Data protocol for the DATA 4 setting. (Refer to p. 74 CAMERA/DATA1 – 4 PORT or p. 96 Data Port.) If the ter-
minal mode is selected, you cannot control the recorder.
• The recorder will not be operable if its unit address is set to 1/2/3/4.
• If the recorder's unit address in Step 1 and the recorder setting in Step 5 are different, the recorder will not be operable.
• In these connections, you cannot use a PS·Data system controller.
• If you use two WJ-HD200 Series recorders, you cannot control the recorders with the system controller connected to the
Master unit. When recording the images from CAM IN 1 to 16, it is recommended to use WJ-HD500 Series recorders.
SIGNAL GND
POWER
AC IN
CAMERA
1
1
2
2
3
3
2
DATA 3 DATA 2
SERIAL ALARM
TERM
OFF ON 4
2
1
4
3
CAMERA
SW IN RS485(CAMERA)
LINE
SELECT
MONITOR OUT
EXT IN
(PLAY IN)
EXT OUT
(REC OUT)
OUT
IN
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
RS485(CAMERA)
DATA 4 DATA HDR
PS•DATA
DATA 1
SIGNAL GND
POWER
DATA 10/100BASE-T MODE RS-232C MULTI SCREEN OUT
SPOT
OUT
1
1
ALARM/REMOTE
OFF
ON
2
2
3
3
4
4
5
5
6
6
7
7
8
8
OUT
VIDEO
OUT
AUDIO
IN
IN
LAN *
* LAN: Local Area Network
VIDEO IN
1 to 8
CAMERA
OUT 1 to 8
(WV-CA48/10K)
Recorder
Matrix Switcher
DATA HDR
DATA 4
(PS • DATA)
MONITOR OUT
EXT IN
Monitor
MULTI
SCREEN OUT
DATA
LAN Cable
HUB/Router