Panasonic WJ-SX 150A - Manual (Page 150)

154
Transmission command toggles alarm sus-
pension ON or OFF.
n=0 OFF
n=1 ON
Alarm ACK
(Each monitor)
CMD:HmmAK ANS:HmmAK
mm=Monitor No.
Item
Alarm input OAIcc No response cc=Alarm No.
Transmission Command
(ASCII)
Response (ASCII) Parameter (ASCII)
Alarm reset
(Each monitor)
CMD:HmmAR ANS:HmmAR
mm=Monitor No.
Alarm all reset CMD:H00AR ANS:H00AR
Alarm suspension MAD madn
Alarm Control
Return to normal view* CMD:HmmSE ANS:HmmSE
mm=Monitor No.
*Available only in SETUP MENU
Item
Display SETUP MENU CMD:HmmSS ANS:HmmSS mm=Monitor No.
Transmission Command
(ASCII)
Response (ASCII) Parameter (ASCII)
Move the cursor leftward CMD:AmmJL — mm=Monitor No.
Setup Control
Move the cursor rightward CMD:AmmJR — mm=Monitor No.
Move the cursor upward CMD:AmmJU — mm=Monitor No.
Move the cursor downward CMD:AmmJD — mm=Monitor No.
Enter "0"
Enter "1"
CMD:AmmT0
CMD:AmmT1
—
—
mm=Monitor No.
mm=Monitor No.
Enter "2" CMD:AmmT2 — mm=Monitor No.
Enter "3" CMD:AmmT3 — mm=Monitor No.
Enter "4" CMD:AmmT4 — mm=Monitor No.
Enter "5" CMD:AmmT5 — mm=Monitor No.
Enter "6" CMD:AmmT6 — mm=Monitor No.
Enter "7" CMD:AmmT7 — mm=Monitor No.
Enter "8" CMD:AmmT8 — mm=Monitor No.
Enter "9" CMD:AmmT9 — mm=Monitor No.
SET CMD:AmmST — mm=Monitor No.
ESC CMD:AmmES — mm=Monitor No.
INC CMD:AmmIN — mm=Monitor No.
DEC CMD:AmmDE — mm=Monitor No.
NEXT CMD:AmmNX — mm=Monitor No.
Available in SETUP MENU, Alarm History
and Video Loss History
PRE CMD:AmmPR — mm=Monitor No.
Available in SETUP MENU, Alarm History
and Video Loss History
Reset a motion-detection area
one by one CMD:AmmCL — mm=Monitor No.
Same function as pressing the CLEAR button
Reset all motion-detection
areas of a camera channel CMD:AmmCV — mm=Monitor No.
Same function as pressing the CLEAR button
while holding down the SHIFT button