Panasonic WJ-SX 150A - Manual (Page 201)

29
Note: If the recorder is WJ-HD300 Series, "B" mark will
light up beside "Off" in the default status.
3. Press the F2 button.
The searching filter will be canceled, and "B" mark will
light up beside "Off".
Notes:
• To recover the searching filter, press the F1 button.
The searching filter will be recovered, and "B" mark
will light up beside "On".
• To cancel the setting and exit "HD300 Listed", press
the MON (ESC) or EXIT button. The LCD display will
return to the default status.
■ Electronic Zooming (EL-ZOOM)
The operations are the same as WJ-HD500 Series. (Refer to
p. 21.)
Note: 2 x and 4 x are available zooming range. 8 x is
unavailable.
■ System Function
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. Press the CAM FUNC/SYS FUNC button while holding
down the SHIFT button, system function of recorder will
be executed.
Notes:
• Refer to the operating instructions of recorder for details
on available functions and function numbers.
• If you have entered a wrong function number (other
than 1 to 999), "Prohibited" will appear on the LCD for
three seconds. Then, the LCD will return to the former
status.
■ Playing the Latest Recorded
Image
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. Press the GO TO LAST button during the playback.
The latest recorded image will be played back.
HD300 Listed 304
On Off
■ Marking
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. Press the MARK button during the playback.
The playback start point will be marked.
Note: The marked playback images will be listed in the
marking list window. Refer to p. 27 Marking search for
how to play back.
■ Displaying Camera Titles
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. When you press the OSD button, the OSD display will
change.
Note: Refer to the recorder’s operating instructions for
details on operations.