Panasonic WJ-SX 150A - Manual (Page 76)

79
Trademarks
• IBM is a trademark of International Business Machines
Corporation.
• Intel and Pentium are trademarks of Intel Corporation.
• Microsoft
® Windows ® are either registered trademarks
of Microsoft Corporation in the United States and/or
other countries.
• VD2 is the original synchronization system of
Matsushita Electric Industrial Co., Ltd.
• Other company names and product names appearing
in the manual are registered trademarks or trademarks
of the company concerned.
Platform
To install WJ-SX150A Administrator Console, the PC should
meet the following requirements.
• Hardware requirements
IBM PC or 100 % compatible, Pentium 3 - equivalent
or higher, 128 MB RAM, 5 MB hard drive space with
additional space for configuration database (.sdt) and
log.
In addition, the PC must be equipped with a serial port.
• Operating system requirements
Microsoft ® Windows ® 98, 98 SE, 2000, XP Professional
• Video display setting requirements
* High color (16 bit) or higher
* 800 x 600 resolution
When installing in the default system setting, the software is
installed in the following directory:
C: \Program Files\Panasonic\SX150A
■ Installation/Uninstallation
● Installation
Insert the CD-ROM program disk into the CD-ROM drive on
the PC. The file is located in the following directory.
E: \Admin\Setup.exe
Double-click "Setup.exe" to begin the installation. Respond
to the dialog boxes by following the directions given.
● Uninstallation
1. Select "Start" – "Settings" – "Control Panel".
2. Click on the "Add/Remove Hardware" button.
3. Select WJ-SX150A Administrator Console and click on
"Add/Remove".
4. Operate according to the direction in the window.
■ Description of WJ-SX150A
Administrator Console
WJ-SX150A Administrator Console is a utility software
which can configure the system settings and control data of
this surveillance system.
WJ-SX150A Administrator Console can configure the follow-
ing settings.
● MASTER-SLAVE
• Master-Slave (p. 81)
• Logical Camera Number (p. 82)
● MANAGEMENT
• Put a file to SX150A (p. 83)
• Get a Configuration Data from SX150A (p. 83)
● SETUP
Sequence Settings
• Tour Sequence (p. 84)
• Group Sequence (p. 85)
Schedule Settings
• Timer Event (p. 85)
• Camera Cleaning (p. 86)
• Daylight Saving Time/Summer Time (p. 87)
Alarm Settings
• Alarm Mode (p. 88)
• Alarm Event (p. 89)
• Alarm Port (p. 90)
Operator Settings
• Operator Registration (p. 90)
• Level Table (p. 91)
• Monitor Selection (p. 92)
• Auto Login/Logout (Auto Log-in/Log-out) (p. 92)
System Settings
• Time & Date (p. 93)
• Cable Compensation/VD2/DATA (p. 94)
• Camera Title (p. 94)
• Data Port (p. 96)
• Recorder (p. 97)
• Multiplexer Mode (p. 98)
• Multiplexer Title (p. 100)
WJ-SX150A Administrator Console
• New (p. 101)
• Select Setup Data File (p. 101)
• Account Manager (p. 101)
• Communication Port (p. 102)
MUX
MUX
WJ-SX150A ADMINISTRATOR CONSOLE