Camera selection – Panasonic WJ-SX 150A User Manual

Page 104

107

■

Camera Selection

1. Select the desired monitor. (Refer to p. 106 Monitor

Selection.)

2. Press the numeric buttons to select the desired camera

number (1 to 99).

3. Press the CAM (SET) button.

The selected camera's image will appear on the active
monitor. The CAMERA indicator will light up and the
selected camera number will appear on the LED dis-
play on the controller.

SETUP

SHIFT

REW/FF

STEP

GROUP SEQ

PAUSE

SUSPEND

CAM SETUP

ALL RESET

ACK

RESET

TOUR SEQ

STOP

OSD

RECORDER

INDEX

STOP

PLAY

PAUSE

Note:

If you select a wrong number, press the CLEAR

button to clear the input.

4. If the selected camera number is not valid, the PRO-

HIBITED indicator and the number on the LED display
will blink for about 3 seconds.
Return to Step 2 and select a new camera number.

5. To replace the currently selected camera with the next

higher-numbered camera , press the NEXT button.

6. To replace the currently selected camera with the next

lower-numbered camera, press the PREV button.

Note:

The PROHIBITED indicator will light up, if the

camera is selected by an operator with higher prior-
ity. Control of the same camera is denied to an
operator with lower priority.