Panasonic WJ-SX 150A - Manual (Page 143)

147
MONITOR DISPLAY WHEN A VIDEO LOSS OCCURS
■ Video Loss Display
• When video loss of CAMERA IN nn (nn is a number) is
detected, " LOSS CH nn" will blink on the monitor.
• When more than one LOSS CH have occurred, "LOSS
CH nn*" will appear on the monitor.
• When the input loss is recovered, "LOSS CH nn" will dis-
appear from the monitor.
• When you press the RESET button while pressing the
"OSD"button, "LOSS CH nn" will disappear from the
monitor.
■ Camera Switching Pulse Loss
Display
• When loss of the camera switching pulse is detected,
“CAMSW LOSS R1” will blink on the monitor.
Note: “R1” is an example of a recorder number.
• When the camera switching pulse is recovered, “CAM
SW LOSS R1” will disappear from the monitor.
MUX
LOSS CH01
LOSS CH01*
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON AUX2 OFF EL-ZOOM
AUX1 ON AUX1 OFF STILL
SHIFT
REW/FF
STEP
GROUP SEQ
PAUSE
SUSPEND ALL RESET
ACK RESET
TOUR SEQ
PREV NEXT
OSD
PLAY PAUSE
CAMSW LOSS R1