Panasonic WJ-SX 150A - Manual (Page 110)

113
■ Receiver Control
The following functions are available only when the
receivers are included in the system and the specified
camera housing is installed.
● Camera Housing Control
Wiper Control
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. Press the CAM (SET) button while holding down the
SHIFT button to turn on the housing wiper of the camera
until buttons are released.
Defroster Control
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. Press the button 9 while holding down the SHIFT button
to turn on the housing defroster of the camera.
3. To turn off the defroster, press the button 8 while hold-
ing down the SHIFT button.
● Auxiliary Control
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. Press the button 3 while holding down the SHIFT button
to turn on the user's auxiliary switch 1 of the receiver.
Press the button 2 while holding down the SHIFT but-
ton to turn off the user's auxiliary switch 1 of the receiv-
er.
3. Press the button 6 while holding down the SHIFT button
to turn on the user's auxiliary switch 2 of the receiver.
Press the button 5 while holding down the SHIFT button
to turn off the user's auxiliary switch 2 of the receiver.
SHIFT
PAUSE
TOUR SEQ
NEXT
PAUSE
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON AUX2 OFF EL-ZOOM
AUX1 ON AUX1 OFF STILL
SHIFT
PAUSE
TOUR SEQ
NEXT
PAUSE
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON AUX2 OFF EL-ZOOM
AUX1 ON AUX1 OFF STILL
SHIFT
PAUSE
TOUR SEQ
NEXT
PAUSE
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON AUX2 OFF EL-ZOOM
AUX1 ON AUX1 OFF STILL
CAMERA SITE ACCESSORIES CONTROL