beautypg.com

Figure 30 – Polycom KIRK 14117800 User Manual

Page 94

background image

94

Configuring KIRK Wireless Server 600v3

14117800, Ed.2.6

9

Click Reset (under Administration menu) to save your configuration.

7.6.1.3 Obtaining a Multi-Cell License

(Primary)

To configure a KWS600v3 Multi-cell solution it is necessary to obtain a multi-cell license.

(E-mail MAC address to [email protected], and you will obtain

the license)

1

Under the Configuration menu, click General, and then copy the serial number of

the KWS600v3 from the Info page.

2

E-mail MAC address to [email protected] and require a

multi-cell license for the KWS600v3.

Note:

Remember to write/paste the MAC address of the KWS600v3 in the e-mail.

3

You will now receive an e-mail containing a text file with the multi-cell license.
Save this file. The text file is to be uploaded to the system.

4

Under the Configuration menu, click General, and then click License.

Figure 30

Adm. Page: Configuration/General/License page

5

Click Browse to search for the text file containing license information, select it, and

then click Open.

6

Click Upload to upload the file.

7

Click either Reset Immediately or Idle Reset.
When resetting the KWS600v3 immediately, all calls are terminated and the

KWS600v3 is reset. When resetting the KWS600v3 when the system is idle, the reset is

done when there are no active calls in the KWS600v3.

8

Click the License menu again to check that the file has been uploaded.

This manual is related to the following products: