3 adjusting the kirk handset with the servicetool, Figure 95, Programming kit handset – Polycom KIRK 14117800 User Manual
Page 164
164
KIRK Handset Management
14117800, Ed.2.6
Figure 95
Programming Kit Handset
Splitter
Serial cable
Note:
For handset adjustment of 40XX Handset you use the charger accompanying the
handset.
Note:
For handset adjustment you also need the programming software (ServiceTool).
The ServiceTool is not part of the Programming Kit Handset but can be downloaded
from www.polycom.com.
9.6.2 Set up of the Hardware for KIRK Handset Adjustment
1
Connect the serial cable to the programming stand/charger and Com port of your
computer.
2
Place the handset in the charger.
The handset is now ready for programming
via the ServiceTool
9.6.3 Adjusting the KIRK Handset with the ServiceTool
The ServiceTool is the tool you access from your desktop and use for repeater
programming, handset adjustment and software download to the handset and repeater.
For more information about adjusting the handset with the ServiceTool, refer to the Help
File in the ServiceTool. The ServiceTool is to be downloaded from www.polycom.com.