3 configuring ethernet link, Figure 21 – Polycom KIRK 14117800 User Manual
Page 86
86
Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
5
In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KWS600v3.
6
In the Network mask field, type a new network mask.
Contact your system administrator for more information.
7
In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8
Click OK.
9
Click Reset (under Administration menu) to save your configuration.
7.5.3 Configuring Ethernet Link
1
Under the Configuration menu, click ETH0, and then click Link.
Figure 21
Adm. Page: Configuration/ETH0/Link page
2
From the Link list, select auto, and then click OK.
When selecting auto, the link speed will be determined by the network switch.
The KWS600v3 supports the following link speeds:
• 10Mb-hdx
• 10Mb-fdx
• 100Mb-hdx
• 100Mb-fdx
3
Click Reset (under Administration menu) to save your configuration.