Figure 40, Figure 41 – Polycom KIRK 14117800 User Manual
Page 103
Configuring KIRK Wireless Server 600v3 103
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.2.3 Configuring DECT Master
(Sync Master)
1
Under the Configuration menu, click DECT, and then click Master.
Figure 40
Adm. Page: Configuration/DECT/Master page
2
From the Mode list, select Off. Selecting Off defines the KWS600v3 as not being the
Master.
3
From the Prot (Protocol) list, select H323.
4
Click OK.
5
Click Reset (under Administration menu) to save your configuration.
7.6.2.4 Configuring DECT Radio
(Sync Master)
1
Under the Configuration menu, click DECT, and then click Radio.
Figure 41
Adm. Page: Configuration/DECT/Radio page
2
In the Master field, type the IP address of the Master (Primary) KWS600v3.
3
In the Radio-id field, type the radio ID of the Sync Master.
4
Click OK.