Polycom KIRK 14117800 - Manual (Page 132)

132 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
2 In the Gatekeeper area:
• From the Mode list, select Standby. Selecting Standby defines the KWS600v3 as
an alternative (Standby) Master.
3
In the Radio field:
• Select the Disable check box to disable the radio.
4
Save the configuration now or wait until you have finished configuring the whole
installation.
For more information about saving the configuration, refer to
“Saving
Configurations” on page 141 .
7.8.3 Configuring LDAP Server
In a KWS600v3 Multi-cell solution it is possible to configure an LDAP Server to handle all
handset/user registration data (such as name, directory number, IPEI etc.).
If you configure an LDAP Server to handle all handset/user registration and read/write
information between the primaries and secondaries of a KWS600v3 Solution, then the
Master KWS600v3 only manages the connection to the call handler.
Note:
Configuring an LDAP Server is only recommended in very large multi-cell
installations (more than 500-600 handsets).
Figure 71 Wireless Server 600v3 Multi-cell installation with LDAP Server
In the LDAP Server tab you configure the LDAP Server.