Polycom KIRK 14117800 User Manual
Page 129
Configuring KIRK Wireless Server 600v3 129
KIRK Wireless Server 600v3 Installation and Configuration Guide
4
In the LDAP area:
The Master KWS600v3 is automatically defined as the LDAP Server.
If you need to configure a standalone LDAP Server in your system, you must deselect
the Master is LDAP Server check box.
Note:
If deselecting the Master is LDAP Server check box on the Master tab, an
LDAP Server tab becomes available. For more information about configuring a
standalone LDAP Server, refer to
5
In the Radio field:
• Select the Disable check box to disable the radio.
6
In the License area:
• Click Browse to search for the text file containing license information, select it,
and then click Open.
Note:
Remember to obtain a multi-cell license. (E-mail the MAC address to
[email protected] and require a multi-cell license for the
KWS600v3).
7
Save the configuration now or wait until you have finished configuring the whole
installation.
For more information about saving the configuration, refer to
7.8.2 Configuring the Alternative Master KIRK Wireless Server 600v3
This section describes how to configure an alternative (Standby) Master KWS600v3 in a
multi-cell solution. In case the Master KWS600v3 stops working, the alternative
(Standby) Master KWS600v3 will take over connection to the call handler.
Note:
Configuring an alternative Master KWS600v3 is optional - and only recommended
- if you have a very large multi-cell installation (number of KWS600v3 and/or handsets).