Figure 53 – Polycom KIRK 14117800 User Manual
Page 112
112
Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
5
In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KWS600v3.
6
In the Network mask field, type a new network mask.
7
In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8
Click OK.
9
Click Reset (under Administration menu) to save your configuration.
7.6.4.3 Configuring Ethernet Link
(Secondary)
1
Under the Configuration menu, click ETH0, and then click Link.
Figure 53
Adm. Page: Configuration/ETH0/Link page
2
From the Link list, select auto, and then click OK.
When selecting auto, the link speed will be determined by the network switch.
3
Click Reset (under Administration menu) to save your configuration.