Polycom KIRK 14117800 - Manual (Page 34)

34 Deploying KIRK Wireless Server 600v3
14117800, Ed.2.6
3.2.2.1 Synchronization Chain With One Sync Master (Primary Sync Ways)
Figure 1 Synchronization Chain
• The synchronization chain must always overlap with the KWS600v3 to sync
on.
• No. 100 is the Sync Master.
• Other radio units are connected to the Sync Master through the
synchronization chain.
• If one of the radio units in the synchronization chain is not working, then the
Figure 2 Synchronization Chain Layout without Alternative Sync Ways
• No. 100 is the Sync Master (can be numbered 1-255).
Note:
It is recommended to place the Sync Master in the middle of the building.
• Green line : Shows the primary sync ways.
• Brown line : Only handover overlap is needed.
Note:
It is recommended to make a site planner. Every KWS600v3 must be
numbered with Radio ID, Primary sync Radio ID, and Alternative sync Radio
ID.